Part No. : E20411 | Manufacturer : draeger safety ag and co kgaa | Item Name: pin grooved headed |
NSN: 5315-00-514-2754 (5315005142754) | CAGE Code: C5810 | FSC: 5315 Nails Machine Keys and Pins |
If you require part number E20411 from Draeger Safety Ag And Co Kgaa which is described as a Pin Grooved Headed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number E20411 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315005142754 and was produced under the CAGE Code C5810. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part E20411 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. E20411
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-00-514-2754 Item Description: PIN,GROOVED,HEADED | 5315 | 005142754 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
E20411 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AASK | HEAD STYLE | FLAT |
ABMZ | DIAMETER | 0.059 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
ABNZ | EFFECTIVE LENGTH | 0.507 INCHES MINIMUM AND 0.517 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.052 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
ABPB | UNDER HEAD LENGTH | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CRRG | PIN HEAD DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
HGTH | HEIGHT | 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
MATT | MATERIAL | STEEL COMP 416 OVERALL |
STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload