Part No. : H34-569 | Alternate P/N : H34569 | Manufacturer : dresser industries inc |
Item Name: screw cap socket head | NSN: 5305-00-893-3155 (5305008933155) | CAGE Code: 35301 |
FSC: 5305 Screws |
If you require part number H34-569 from Dresser Industries Inc which is described as a Screw Cap Socket Head component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number H34-569 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305008933155 and was produced under the CAGE Code 35301. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part H34-569 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. H34-569
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-893-3155 Item Description: Screw Cap Socket Head | 5305 | 008933155 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
H34-569 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.875 INCHES MINIMUM |
AASB | FASTENER LENGTH | 1.059 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.600 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
ASDB | WIDTH ACROSS FLATS | 0.188 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
CQHQ | MINIMUM YIELD STRENGTH | 140000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
FEAT | SPECIAL FEATURES | SCREW,CAP, SOCKET HEAD ALLOY STEEL, 0.312-24UNF-2A, THD LGTH 0.875 IN. MIN.; FASTNER LGTH 1.059 IN. NOMINAL |
MATT | MATERIAL | STEEL OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
ZZZK | SPECIFICATION/STANDARD DATA | 81348-FF-S-86 GOVERNMENT SPECIFICATION |
ZZZT | NONDEFINITIVE SPEC/STD DATA | IV TYPE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload