Part No. : 1119518 | Manufacturer : dressta north america ltd | Item Name: regulator engine generator |
NSN: 2920-00-855-5410 (2920008555410) | CAGE Code: 45RP7 | FSC: 2920 Engine Electrical System Components Nonaircraft |
If you require part number 1119518 from Dressta North America Ltd which is described as a Regulator Engine Generator component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 1119518 which is listed under the Federal Supply Class 2920 Engine Electrical System Components Nonaircraft. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920008555410 and was produced under the CAGE Code 45RP7. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 1119518 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 1119518
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2920-00-855-5410 Item Description: Regulator Engine Generator | 2920 | 008555410 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
1119518 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AARA | TERMINAL QUANTITY | 4 |
AARB | TERMINAL TYPE | QUICK DISCONNECT, MALE |
ABTB | MOUNTING HOLE DIAMETER | 0.270 INCHES MAXIMUM ERR-100 ERR-100 |
ADER | MOUNTING STYLE | TWO HOLE |
ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 4.340 INCHES NOMINAL |
ADZC | ENVIRONMENTAL PROTECTION | HERMETICALLY SEALED |
ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
ANYC | SYSTEM VOLTAGE RATING | 24.0 |
ANYD | SYSTEM GROUND POLARITY | NEGATIVE |
ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
ANZC | FIELD RELAY UNIT | INCLUDED |
ANZE | TERMINAL ENCASEMENT | NOT ENCASED |
ABTB | MOUNTING HOLE DIAMETER | 0.265 INCHES MINIMUM ERR-100 ERR-100 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload