GF802CN1 by Dynamic Air Engineering Inc With NSN 4140-01-115-0877

Part No. : GF802CN1	Manufacturer : dynamic air engineering inc	Item Name: fan centrifugal
NSN: 4140-01-115-0877 (4140011150877)	CAGE Code: 18965	FSC: 4140 Fans Air Circulators and Blower Equipment

If you require part number GF802CN1 from Dynamic Air Engineering Inc which is described as a Fan Centrifugal component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number GF802CN1 which is listed under the Federal Supply Class 4140 Fans Air Circulators and Blower Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4140011150877 and was produced under the CAGE Code 18965. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part GF802CN1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for GF802CN1

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Characteristics Data of NSN 4140-01-115-0877, 4140011150877

MRC	Criteria	Characteristic
STYL	STYLE DESIGNATOR	FIXED, RECTANGULAR OUTLETS
CXCB	DISCHARGE DIRECTION	HORIZONTAL
AKNA	INCLOSURE TYPE	FULLY INCLOSED
SFTT	SURFACE TREATMENT	ZINC BLADE
MATT	MATERIAL	PLASTIC PHENOLIC HOUSING
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED HOLE
AKCV	DRIVE TYPE	DIRECT
FAAZ	PHASE	SINGLE
CRWJ	OUTLET LOCATION	TOP
AJLV	OUTLET INSIDE HEIGHT	1.156 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
AJLY	STATIC PRESSURE AT SPECIFIED AIR FLOW RATE	0.0 INCHES OF WATER
CWLY	PRIME MOVER DRIVE SHAFT BEARING TYPE	SLEEVE
AGBD	ELECTRICAL CONNECTION TYPE	WIRE LEAD
AYSY	ROTATION DIRECTION FOR WHICH DESIGNED	CLOCKWISE
ABBB	SPEED ADJUSTMENTS	SINGLE SPEED
CQKX	AIR FLOW RATE	40.0 CUBIC FEET PER MINUTE NOMINAL
CSBH	VOLTAGE IN VOLTS AND CURRENT TYPE	115.0 AC
ADZC	ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT
AEQC	OPERATING SPEED AT RATED CAPACITY IN RPM	13000.0
FEAT	SPECIAL FEATURES	RADIAL BLADE; BRUSH TYPE MOTOR
AEHY	AMBIENT TEMP AT FULL RATED POWER	-20.0 DEG CELSIUS AND 35.0 DEG CELSIUS
ABGL	WIDTH	5.380 INCHES NOMINAL
AAYD	STAGE QUANTITY	1
ABRY	LENGTH	3.530 INCHES NOMINAL
AKDJ	PRIME MOVER TYPE	ELECTRIC MOTOR
HGTH	HEIGHT	3.690 INCHES NOMINAL

Related NSN Componets for GF802CN1

Part GF802CN1 With Different Manufacturers

GF802CN1

RFQ

If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.

Upload

We are proud to supply every branch of the United States military

Top NSN Parts

view all

Leading NSN Parts Manufacturer