Part No. : 5305000425580 | Manufacturer : e c a etablissement central | Item Name: screw assembled washer |
NSN: 5305-00-042-5580 (5305000425580) | CAGE Code: SCY13 | FSC: 5305 Screws |
If you require part number 5305000425580 from E C A Etablissement Central which is described as a Screw Assembled Washer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 5305000425580 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305000425580 and was produced under the CAGE Code SCY13. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 5305000425580 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 5305000425580
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-042-5580 Item Description: Screw Assembled Washer | 5305 | 000425580 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
5305-00-042-5580 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.523 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
AASK | HEAD STYLE | HEXAGON |
AASU | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
AAVW | WASHER QUANTITY | 1 |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CMLP | THREAD QUANTITY PER INCH | 28 |
CSPG | PRIMARY WASHER OUTSIDE DIAMETER | 0.460 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
CTHW | PRIMARY WASHER STYLE | FLAT EXTERNAL TEETH |
CTJJ | PRIMARY WASHER MATERIAL THICKNESS | 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM |
MATT | MATERIAL | STEEL COMP 1010 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1050 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload