FU808KKM0260135AA by Eaton Aeroquip Inc With NSN 4720-01-366-3735

Part No. : FU808KKM0260135AA	Manufacturer : eaton aeroquip inc	Item Name: hose assembly nonmetallic
NSN: 4720-01-366-3735 (4720013663735)	CAGE Code: 01276	FSC: 4720 Hose and Tubing Flexible

If you require part number FU808KKM0260135AA from Eaton Aeroquip Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number FU808KKM0260135AA which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720013663735 and was produced under the CAGE Code 01276. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part FU808KKM0260135AA today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for FU808KKM0260135AA

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number FU808KKM0260135AA with NSN 4720-01-366-3735, 4720-01-366-3735

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-366-3735 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	013663735	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
44Q711-D0	2	9	D

Characteristics Data of NSN 4720-01-366-3735, 4720013663735

MRC	Criteria	Characteristic
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC
CQGM	MAXIMUM OPERATING PRESSURE	3000.0 POUNDS PER SQUARE INCH
CRFY	FLOW ANGLE	90.0 DEGREES 1ST END
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END
CRWL	INSIDE SURFACE CONDITION	SMOOTH
CTCJ	FLANGE STYLE	DOUBLE OVAL SAE SPLIT TYPE FLANGE) 2ND END
FEAT	SPECIAL FEATURES	CRIMPED FITTINGS
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKU	FLANGE THICKNESS	0.265 INCHES NOMINAL 1ST END
ABKU	FLANGE THICKNESS	0.265 INCHES NOMINAL 2ND END
ABKV	OUTSIDE DIAMETER	1.230 INCHES NOMINAL
ADKX	ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG	135.0
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.875 INCHES NOMINAL 1ST END
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.875 INCHES NOMINAL 1ST END
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.062 INCHES NOMINAL 2ND END
AFQN	FLANGE LENGTH	2.590 INCHES NOMINAL 1ST END
AGFF	FLANGE WIDTH	2.310 INCHES NOMINAL 2ND END
AHNC	CONNECTION STYLE	PLAIN 1ST END
AHNC	CONNECTION STYLE	PLAIN 2ND END
AKUU	END CONNECTION DESIGN	ELBOW 1ST END
AKUU	END CONNECTION DESIGN	ELBOW 2ND END
AWLS	CONNECTION TYPE	PLAIN FACE FLANGE 1ST END
MEDA	MEDIA FOR WHICH DESIGNED	HYDRAULIC FLUID SINGLE RESPONSE
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND
ACKH	MINIMUM INSIDE BENDING RADIUS	9.500 INCHES
AECS	BOLT HOLE QUANTITY	4 1ST END
AFQN	FLANGE LENGTH	2.780 INCHES NOMINAL 2ND END
AKUT	END FLANGE CONSTRUCTION	SOLID 1ST END
CTCJ	FLANGE STYLE	DOUBLE OVAL SAE SPLIT TYPE FLANGE) 1ST END
AARX	INSIDE DIAMETER	0.750 INCHES NOMINAL
AECS	BOLT HOLE QUANTITY	4 2ND END
AHNX	BOLT HOLE DIAMETER	0.406 INCHES NOMINAL 1ST END
CQBD	BURST TEST PRESSURE	12000.0 POUNDS PER SQUARE INCH
CRXX	MEASURING METHOD AND LENGTH	26.000 INCHES NOMINAL OVERALL
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.031 INCHES NOMINAL 2ND END
AGAV	END ITEM IDENTIFICATION	3810-01-268-1737,TRUCK MOUNTED CRANE
AGFF	FLANGE WIDTH	2.060 INCHES NOMINAL 1ST END
AHNX	BOLT HOLE DIAMETER	0.406 INCHES NOMINAL 2ND END
AKUT	END FLANGE CONSTRUCTION	SOLID 2ND END
AWLS	CONNECTION TYPE	PLAIN FACE FLANGE 2ND END