Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : CR-04-2S3-30-DJA | Alternate P/N : CR042S330DJA | Manufacturer : eaton aerospace ltd |
| Item Name: motor hydraulic | NSN: 4320-01-304-8208 (4320013048208) | CAGE Code: 62983 |
| FSC: 4320 Power And Hand Pumps |
If you require part number CR-04-2S3-30-DJA from Eaton Aerospace Ltd which is described as a Motor Hydraulic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number CR-04-2S3-30-DJA which is listed under the Federal Supply Class 4320 Power And Hand Pumps. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4320013048208 and was produced under the CAGE Code 62983. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part CR-04-2S3-30-DJA today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| ASAP | SPLINE PITCH | 12/24 |
| ARQA | SHAFT PROTRUSION LENGTH | 1.970 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 14 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.530 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 790.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AGAV | III END ITEM IDENTIFICATION | 2420-01-196-0299 |
| AXFH | SPLINE LENGTH | 1.410 INCHES NOMINAL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | 4.190 INCHES NOMINAL |
| ASMM | CONNECTION QUANTITY | 2 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGJS | PITCH DIAMETER | 1.170 INCHES NOMINAL |
| AAPL | TORQUE LOAD RATING | 2120.0 INCH-POUNDS |
| APJC | THREAD LOCATION | INTERNAL |
| AAUH | SPLINE MINOR DIAMETER | 1.060 INCHES NOMINAL |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 3.900 CUBIC INCHES |
| ABUJ | THREAD SIZE | 0.875-14 |
| AAUJ | SPLINE MAJOR DIAMETER | 1.250 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | INLET AND OUTLET |
| AAXX | MOUNTING TYPE | FLANGE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions