Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 83722W1ITEM47 | Manufacturer : eaton corporation | Item Name: spring helical torsion |
| NSN: 5360-00-312-3375 (5360003123375) | CAGE Code: 15605 | FSC: 5360 Coil Flat Leaf and Wire Springs |
If you require part number 83722W1ITEM47 from Eaton Corporation which is described as a Spring Helical Torsion component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 83722W1ITEM47 which is listed under the Federal Supply Class 5360 Coil Flat Leaf and Wire Springs. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5360003123375 and was produced under the CAGE Code 15605. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 83722W1ITEM47 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5360-00-312-3375 Item PartTypeName: SPRING,HELICAL,TORSION | 5360 | 003123375 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 78447W1ITEM2 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| ABQK | END STYLE | HINGE END FIRST END |
| ABQK | END STYLE | SMALL OFFSET HOOK AT SIDE SECOND END |
| AGEK | SPRING FREE LENGTH | 1.250 INCHES NOMINAL |
| APCN | COIL QUANTITY | 4 |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| AXMC | HOOK RADIUS | 0.188 INCHES NOMINAL OVERALL |
| AXMH | END ANGULAR RELATIONSHIP | ENDS PARALLEL ONE TO OTHER |
| CXTH | END LENGTH | 0.250 INCHES NOMINAL BOTH ENDS |
| CXTP | END LENGTH FROM SECOND BEND TO THIRD BEND OR END | 0.438 INCHES NOMINAL OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | ENAMEL OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE TORSION LEFT HAND |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions