Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MIL-DTL-10215 | Alternate P/N : MILDTL10215 | Manufacturer : eca etablissement central des |
| Item Name: shaft assembly flex | NSN: 6680-01-017-8567 (6680010178567) | CAGE Code: SCY13 |
If you require part number MIL-DTL-10215 from Eca Etablissement Central Des which is described as a Shaft Assembly Flex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MIL-DTL-10215 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6680010178567 and was produced under the CAGE Code SCY13. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MIL-DTL-10215 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 169.125 INCHES NOMINAL |
| CFRZ | CORE OVERALL LENGTH | 169.125 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.484 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END RIGHT-HAND SECOND END |
| AJXJ | CORE MATERIAL | STEEL |
| BJPS | CASING MATERIAL | PLASTIC |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F917 |
| AKMF | CORE SURFACE TREATMENT | CADMIUM PLATED OR ZINC PLATED |
| AKMH | CORE DIAMETER | 0.128 INCHES MINIMUM AND 0.152 INCHES MAXIMUM |
| CGDN | MINIMUM OPERATING RADIUS | 5.000 INCHES |
| CFRY | LUBRICATION FITTING | NOT PROVIDED FIRST END NOT PROVIDED SECOND END |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 9 CLASS AND A GROUP AND I TYPE |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| AEDN | TIP LENGTH | 0.972 INCHES NOMINAL FIRST END 0.770 INCHES NOMINAL SECOND END |
| ABUJ | (NON-CORE DATA) THREAD SIZE | 7/8-18 5/8-18 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL FIRST END THREADED INTERNAL SECOND END |
| CFSM | (NON-CORE DATA) STRENGTH RATING CHARACTERISTICS | 15.0 INCH-POUNDS TORSION STRENGTH EITHER DIRECTION |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| CFRP | CASING LENGTH BETWEEN FERRULES | 168.000 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CFRT | SWIVEL END | NOT PROVIDED FIRST END NOT PROVIDED SECOND END |
| CFRW | END OVERALL DIAMETER | 1.000 INCHES MAXIMUM FIRST END 0.750 INCHES MAXIMUM SECOND END |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215K |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.153 INCHES NOMINAL DIAMETER FIRST END 0.104 INCHES NOMINAL ACROSS FLATS SECOND END |
| AAJD | THREAD CLASS | 2B FIRST END 2B SECOND END |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| APJC | THREAD LOCATION | INTERNAL FIRST END INTERNAL SECOND END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions