Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 40763-6 | Alternate P/N : 407636 | Manufacturer : economy engineering co |
| Item Name: bearing ball annular | NSN: 3110-01-127-8082 (3110011278082) | CAGE Code: 72074 |
| FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 40763-6 from Economy Engineering Co which is described as a Bearing Ball Annular component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 40763-6 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110011278082 and was produced under the CAGE Code 72074. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 40763-6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-127-8082 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 011278082 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Z99502ABSY1Z8 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 11.00 MILLIMETERS NOMINAL |
| ABXV | BORE DIAMETER | 0.5000 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 35.00 MILLIMETERS NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | 0.0020 INCHES MINIMUM RADIAL AND 0.0080 INCHES MAXIMUM RADIAL |
| CBBL | FEATURES PROVIDED | SNAP RING-GROOVE MOUNTING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | LOW SPEED TEST 75 PERCENT FULL OF SPECIFIED LUBRICANT FURNISHED WITH 9 BALLS,0.2100 IN. DIA RADIAL CLEARANCE MUST BE TESTED UNDER A 3 LB PLUS OR MINIS 4 OUNCE GAUGE LOAD |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | ALVANIA 3,FSCM 54527 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL RETAINER |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions