Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 60476-1 | Alternate P/N : 604761 | Manufacturer : edo corporation |
| Item Name: shaft shouldered | NSN: 3040-00-406-4844 (3040004064844) | CAGE Code: 9Y580 |
If you require part number 60476-1 from Edo Corporation which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 60476-1 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040004064844 and was produced under the CAGE Code 9Y580. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 60476-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-406-4844 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 004064844 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 60476-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND SLOTTED |
| AAHW | SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| AAHX | SECOND END GROOVE DIAMETER | 0.2290 INCHES MINIMUM AND 0.2310 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.560 INCHES NOMINAL |
| AKTN | SECOND END SLOT WIDTH | 0.046 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.4530 INCHES MINIMUM AND 0.4580 INCHES MAXIMUM |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.380 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.007 INCHES MINIMUM AND 0.009 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.2496 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| AMGR | SECOND END SLOT DEPTH | 0.040 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| CSPY | LARGEST STEP DIAMETER | 0.560 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | SHAFT IS ECCENTRIC |
| MATT | MATERIAL | STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions