Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NAS1123-6H | Alternate P/N : NAS11236H | Manufacturer : f and c sales inc |
| Item Name: screw close tolerance | NSN: 5305-01-111-6685 (5305011116685) | CAGE Code: 30902 |
| FSC: 5305 Screws |
If you require part number NAS1123-6H from F And C Sales Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1123-6H which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305011116685 and was produced under the CAGE Code 30902. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1123-6H today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-111-6685 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011116685 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1123-6H | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.636 INCHES MINIMUM AND 0.666 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1123 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions