Part No. : C4PM10205-1 | Alternate P/N : C4PM102051 | Manufacturer : field aviation inc |
Item Name: bolt machine | NSN: 5306-00-060-5756 (5306000605756) | CAGE Code: 1C762 |
FSC: 5306 Bolts |
If you require part number C4PM10205-1 from Field Aviation Inc which is described as a Bolt Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number C4PM10205-1 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306000605756 and was produced under the CAGE Code 1C762. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part C4PM10205-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. C4PM10205-1
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-00-060-5756 Item Description: Bolt Machine | 5306 | 000605756 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
C4pm10205-1 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.274 INCHES MINIMUM AND 0.308 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 1.015 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT CHAMFER |
AASL | HEAD DIAMETER | 0.367 INCHES NOMINAL |
AASU | HEAD HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.707 INCHES MINIMUM AND 0.741 INCHES MAXIMUM |
CBBL | FEATURES PROVIDED | FINISHED HEAD |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL OVERALL |
FEAT | SPECIAL FEATURES | CHAMFER ONE SIDE OF HEAD AT AN ANGLE OF 0.063 IN. BEGINNING AT POINT 0.150 IN. FROM TOP OF HEAD |
MATT | MATERIAL | STEEL OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload