Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : FON2-6394-3-3 | Alternate P/N : FON2639433 | Manufacturer : fokker aerostructures b v |
| Item Name: rivet blind | NSN: 5320-00-411-9439 (5320004119439) | CAGE Code: H1822 |
| FSC: 5320 Rivets |
If you require part number FON2-6394-3-3 from Fokker Aerostructures B V which is described as a Rivet Blind component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number FON2-6394-3-3 which is listed under the Federal Supply Class 5320 Rivets. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5320004119439 and was produced under the CAGE Code H1822. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part FON2-6394-3-3 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-411-9439 Item PartTypeName: RIVET,BLIND | 5320 | 004119439 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13220E5213-3 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.265 INCHES NOMINAL |
| AASK | HEAD STYLE | FLUSH FLAT) COUNTERSUNK INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.094 INCHES NOMINAL |
| AAZF | SHANK STYLE | PULL THROUGH HOLLOW SHANK |
| AAZG | HEAD MAJOR DIAMETER | 0.183 INCHES NOMINAL |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| ANEE | GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES,TOLERANCES,FIT RESTRICTIONS,MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM,DEATH OR SERIOUS INJURY |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions