Part No. : 1683 | Manufacturer : gamble charles t industries | Item Name: resistor fixed wire wound |
NSN: 5905-00-106-7022 (5905001067022) | CAGE Code: 16119 |
If you require part number 1683 from Gamble Charles T Industries which is described as a Resistor Fixed Wire Wound component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 1683 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905001067022 and was produced under the CAGE Code 16119. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 1683 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 1683
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-106-7022 Item Description: Resistor Fixed Wire Wound | 5905 | 001067022 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
1683 | 2 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAPP | ELECTRICAL RESISTANCE | 6.300 KILOHMS |
AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 |
AAQZ | INCLOSURE METHOD | ENCAPSULATED |
AARB | TERMINAL TYPE | WIRE LEAD |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
ABPM | BODY DIAMETER | 0.140 INCHES NOMINAL |
ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
AEFB | POWER DISSIPATION RATING IN WATTS | 0.100 FREE AIR |
STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
TEST | TEST DATA DOCUMENT | 88818-600013565 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload