Part No. : 100824MM | Manufacturer : gates rubber co | Item Name: bushing sleeve |
NSN: 5365-01-647-0643 (5365016470643) | CAGE Code: 79563 | FSC: 5365 Bushings Rings Shims and Spacers |
If you require part number 100824MM from Gates Rubber Co which is described as a Bushing Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 100824MM which is listed under the Federal Supply Class 5365 Bushings Rings Shims and Spacers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5365016470643 and was produced under the CAGE Code 79563. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 100824MM today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 100824MM
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 0.875 INCHES NOMINAL |
ADAR | BODY OUTSIDE DIAMETER | 1.328 INCHES NOMINAL |
ADAS | BODY INSIDE DIAMETER | 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
BZLX | CORNER SHAPE | CHAMFERED OUTSIDE LEFT CORNER |
BZLX | CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
BZLX | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER |
BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | TAPER-LOCK BUSHING |
FEAT | SPECIAL FEATURES | BOLT CIRCLE IS 1.328, 2 HALF HOLES LOCATED 180 DEGREES APART ARE NOT THREADED, 1 HALF HOLE LOCATED ON SAME BOLD CIRCLE HALF WAY BETWEEN THE OTHER HOLES THIS HOLE IS THREADED. BOLT HOLES DO NOT GO FULL LENGTH. INSIDE HAS A FULL LENGTH KEY WA |
MATT | MATERIAL | STEEL OVERALL |
STYL | STYLE DESIGNATOR | SPLIT, PLAIN, NO OUTSIDE FLANGES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload