Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : VTDX15-4N2 | Alternate P/N : VTDX154N2 | Manufacturer : general dynamics global imaging |
| Item Name: synchro differential transmitter | NSN: 5990-00-419-7584 (5990004197584) | CAGE Code: 10112 |
| FSC: 5990 Synchros and Resolvers |
If you require part number VTDX15-4N2 from General Dynamics Global Imaging which is described as a Synchro Differential Transmitter component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number VTDX15-4N2 which is listed under the Federal Supply Class 5990 Synchros and Resolvers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5990004197584 and was produced under the CAGE Code 10112. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part VTDX15-4N2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-419-7584 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER | 5990 | 004197584 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M20708/17-01C | E | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.4700 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 215.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 3.5 WATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 375.00 MINIMUM AND 525.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 80.00 MINIMUM AND 84.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 113.00 MINIMUM AND 138.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 27.00 MINIMUM AND 33.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT MAXIMUM |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.011 INCH-OUNCES MINIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9300 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2320 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.186 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/17 GOVERNMENT SPECIFICATION |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions