Part No. : 555-009-001 | Alternate P/N : 555009001 | Manufacturer : general dynamics satcom technologies |
Item Name: pin grooved headless | NSN: 5315-01-469-5404 (5315014695404) | CAGE Code: 0F6V7 |
FSC: 5315 Nails Machine Keys and Pins |
If you require part number 555-009-001 from General Dynamics Satcom Technologies which is described as a Pin Grooved Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 555-009-001 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315014695404 and was produced under the CAGE Code 0F6V7. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 555-009-001 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 555-009-001
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-01-469-5404 Item Description: Pin Grooved Headless | 5315 | 014695404 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
555-009-001 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AAHP | SECOND END STYLE | CHAMFERED |
ABHP | OVERALL LENGTH | 2.120 INCHES NOMINAL |
ABMZ | DIAMETER | 0.998 INCHES MINIMUM AND 0.999 INCHES MAXIMUM |
ABNZ | EFFECTIVE LENGTH | 1.700 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.130 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | 5895-01-379-0125 |
AMCS | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL |
AMFM | SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
CRDY | FIRST END LOCATION | GROOVED END |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
FEAT | SPECIAL FEATURES | HEAT TREAT TO H1100 CONDITION PRIOR TO MACHINING |
MATT | MATERIAL | STEEL COMP 630 OVERALL |
STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload