Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 5001T62P01 | Manufacturer : general electric company | Item Name: gear bevel |
| NSN: 3020-00-904-0887 (3020009040887) | CAGE Code: 99207 |
If you require part number 5001T62P01 from General Electric Company which is described as a Gear Bevel component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 5001T62P01 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020009040887 and was produced under the CAGE Code 99207. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 5001T62P01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-904-0887 Item PartTypeName: GEAR,BEVEL | 3020 | 009040887 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5001T62P01 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| BDTX | SPLINE PITCH DIAMETER | 0.4375 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 89.3 ROCKWELL SUPERFICIAL 15-N MINIMUM TEETH AND 91.5 ROCKWELL SUPERFICIAL 15-N MAXIMUM TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.152 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.490 INCHES |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 35.3666 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.158 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.290 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.406 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 0.810 INCHES SECOND END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,BACK HUB PROTRUDING |
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSA | SPLINE QUANTITY | 14 BOTH ENDS |
| AGJS | PITCH DIAMETER | 1.1000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions