Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3008T53P01 | Manufacturer : general electric company | Item Name: pin shoulder hollow |
| NSN: 5315-00-011-2602 (5315000112602) | CAGE Code: 99207 | FSC: 5315 Nails Machine Keys and Pins |
If you require part number 3008T53P01 from General Electric Company which is described as a Pin Shoulder Hollow component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3008T53P01 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315000112602 and was produced under the CAGE Code 99207. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3008T53P01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-011-2602 Item PartTypeName: PIN,SHOULDER,HOLLOW | 5315 | 000112602 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3008T53P01 | 6 | 2 | 8 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.2512 INCHES MINIMUM AND 0.2516 INCHES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,SHOULDER,HOLLOW |
| FEAT | SPECIAL FEATURES | MATERIAL CORROSION RESISTANT STEEL PER AMS 5646 347) |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| SPCL | SPECIAL TEST FEATURES | PRODUCT MUST CONFORM TO THE FOLLOWING P23-TE5 FOR MARKING INSTRUCTIONS P3-TE10 FOR QUALITY CONTROL REQUIREMENTS P1 TE2 FOR INTERPRETATION OF DRAWING P1-TE3 FOR SHOP RUN TOLERANCES P1-TE4 FOR SHOP RUN TOLERANCES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions