Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 17L375PH | Manufacturer : general electric company | Item Name: capacitor fixed paper dielectric |
| NSN: 5910-00-984-6136 (5910009846136) | CAGE Code: 01002 | FSC: 5910 Capacitors |
If you require part number 17L375PH from General Electric Company which is described as a Capacitor Fixed Paper Dielectric component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 17L375PH which is listed under the Federal Supply Class 5910 Capacitors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5910009846136 and was produced under the CAGE Code 01002. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 17L375PH today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-00-984-6136 Item PartTypeName: CAPACITOR,FIXED,PAPER DIELECTRIC | 5910 | 009846136 | Y | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 17L375PH | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ONE TERMINAL COMMON TO EACH SECTIONONE TERMINAL COMMON TO EACH SECTION |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 18 UNTHREADED MOUNTING HOLES18 UNTHREADED MOUNTING HOLES |
| BWGP | SECTION QUANTITY | 44 |
| CBBL | FEATURES PROVIDED | MOUNTING HARDWARE AND MOUNTING HARDWARE AND HERMETICALLY SEALED CASEHERMETICALLY SEALED CASE |
| CQBQ | CAPACITANCE VALUE PER SECTION | 13800.000 PICOFARADS ALL SECTIONS13800.000 PICOFARADS ALL SECTIONS |
| CQJJ | NONDERATED OPERATING TEMP | -54.0 DEG CELSIUS MINIMUM AND-54.0 DEG CELSIUS MINIMUM AND 52.0 DEG CELSIUS MAXIMUM52.0 DEG CELSIUS MAXIMUM |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 30000.0 DC ALL SECTIONS30000.0 DC ALL SECTIONS |
| CRTP | TOLERANCE RANGE PER SECTION | -3.00 TO 7.00 PERCENT 1ST SECTION AND-3.00 TO 7.00 PERCENT 2ND SECTION AND-3.00 TO 7.00 PERCENT 3RD SECTION AND-3.00 TO 7.00 PERCENT 4TH SECTION |
| CWJK | CASE MATERIAL | METAL |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 0.2500 |
| TEST | TEST DATA DOCUMENT | 18876-9994344 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 THREADED STUD |
| AAQL | BODY STYLE | W/MTG TABS/FLANGES TERMINAL S) ON ONE SURFACEW/MTG TABS/FLANGES TERMINAL S) ON ONE SURFACE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHEDNOT ESTABLISHED |
| ADAQ | BODY LENGTH | 18.000 INCHES NOMINAL18.000 INCHES NOMINAL |
| ADAT | BODY WIDTH | 8.120 INCHES NOMINAL8.120 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 17.930 INCHES NOMINAL17.930 INCHES NOMINAL |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 13.180 INCHES MINIMUM AND 13.180 INCHES MINIMUM AND 13.300 INCHES MAXIMUM13.300 INCHES MAXIMUM |
| AEBU | TERMINAL HEIGHT FROM BODY | 3.000 INCHES NOMINAL3.000 INCHES NOMINAL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.438 INCHES NOMINAL0.438 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 20.563 INCHES NOMINAL20.563 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions