Part No. : 300 1 | Alternate P/N : 3001 | Manufacturer : general hardware co inc |
Item Name: rule machinist s | NSN: 5210-00-203-7703 (5210002037703) | CAGE Code: 73792 |
FSC: 5210 measuring Tools Craftsmens |
If you require part number 300 1 from General Hardware Co Inc which is described as a Rule Machinist S component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 300 1 which is listed under the Federal Supply Class 5210 measuring Tools Craftsmens. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5210002037703 and was produced under the CAGE Code 73792. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 300 1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 300 1
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5210-00-203-7703 Item Description: Rule Machinist S | 5210 | 002037703 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
300 1 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABGL | WIDTH | 0.469 INCHES NOMINAL |
ABNM | THICKNESS | 0.031 INCHES NOMINAL |
CMTX | EDGE SMALLEST GRADUATION UNIT | 1/64 INCH AND 1/32 INCH |
CMWB | BEVELED EDGE | NOT INCLUDED |
CMWC | READING DIRECTION | RIGHT |
CMWD | CONVERSION TABLE TYPE | DECIMAL EQUIVALENT |
CMWF | TAPERED END | NOT INCLUDED |
FEAT | SPECIAL FEATURES | FLEXIBLE; SLIDING POCKET CLIP DOUBLES AS DEPTH GAGE |
LGTH | LENGTH | 6.000 INCHES |
MATT | MATERIAL | STEEL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload