Part No. : 647290 | Manufacturer : general motors corp | Item Name: cylinder assembly hydraulic brak |
NSN: 2530-00-495-8860 (2530004958860) | CAGE Code: 7X677 | FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components |
If you require part number 647290 from General Motors Corp which is described as a Cylinder Assembly Hydraulic Brak component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 647290 which is listed under the Federal Supply Class 2530 Vehicular Brake Steering Axle Wheel and Track Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530004958860 and was produced under the CAGE Code 7X677. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 647290 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 647290
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2530-00-495-8860 Item Description: Cylinder Assembly Hydraulic Brak | 2530 | 004958860 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
647290 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAFZ | BODY MATERIAL | IRON, CAST |
ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
ABKW | OVERALL HEIGHT | 4.938 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 2.250 INCHES NOMINAL |
AFLW | ACTUATION METHOD | DIRECT |
AGAV | III END ITEM IDENTIFICATION | 3930-00-738-5938 |
BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
BMWH | RESERVOIR TYPE | INTEGRAL |
BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.000 INCHES NOMINAL |
CBBL | FEATURES PROVIDED | RUBBER BOOT |
CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
CLMQ | MOUNTING FACILITY DIAMETER | 0.391 INCHES NOMINAL |
CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.438 INCHES NOMINAL |
CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
CLMT | PORT STYLE | GASKET SEAL |
CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
CLMX | PORT THREAD DIAMETER | 0.500 INCHES NOMINAL |
CLMY | PORT THREAD QUANTITY PER INCH | 20 |
CLNB | PORT THREAD CLASS | 2B |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload