Part No. : 3L05NR3729J99YH | Manufacturer : general motors corp | Item Name: bearing ball annular |
NSN: 3110-00-050-0707 (3110000500707) | CAGE Code: 43334 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 3L05NR3729J99YH from General Motors Corp which is described as a Bearing Ball Annular component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3L05NR3729J99YH which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110000500707 and was produced under the CAGE Code 43334. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3L05NR3729J99YH today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3L05NR3729J99YH
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-050-0707 Item Description: Bearing Ball Annular | 3110 | 000500707 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3l05nr3729j99yh | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 1.8501 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | STAMPED |
AGZC | LOAD DIRECTION | RADIAL |
AGZD | BORE SHAPE | STRAIGHT |
AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
AKVV | INTERNAL CLEARANCE | 0.0009 INCHES NOMINAL RADIAL |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
LBMA | LUBRICATION MATERIAL | OIL |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-7808 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL COMP 1005 RETAINER |
MATT | MATERIAL | STEEL COMP E51100 AND STEEL COMP E52100 BALL |
MATT | MATERIAL | STEEL COMP E52100 INNER RING |
MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload