Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : EX06614B | Manufacturer : general motors corp | Item Name: bearing ball duplex |
| NSN: 3110-00-928-2343 (3110009282343) | CAGE Code: 43334 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number EX06614B from General Motors Corp which is described as a Bearing Ball Duplex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number EX06614B which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110009282343 and was produced under the CAGE Code 43334. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part EX06614B today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-928-2343 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 009282343 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 950543-7 | 2 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.1774 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1250 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | LUBRICATING OIL |
| AGYC | CALIBRATION DESIGNATOR | C |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| CTHQ | BEARING PRELOAD RATING | 0.5 POUNDS MINIMUM AND 1.5 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 14.0 DEGREES MINIMUM AND 19.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | PAIR OF BEARINGS,DUPLEX MOUNTED UNSHIELDED SIDES. MAX TORQUE 20.000 MG/MM UNDER 75 GM THRUST LOAD W/LUBRICATING OIL APPLIED. V MARK ON OF BEARING ASSY |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions