Part No. : 477448 | Manufacturer : general motors corp | Item Name: pin grooved headed |
NSN: 5315-00-737-7414 (5315007377414) | CAGE Code: 7X677 |
If you require part number 477448 from General Motors Corp which is described as a Pin Grooved Headed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 477448 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315007377414 and was produced under the CAGE Code 7X677. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 477448 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 477448
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AASK | HEAD STYLE | FLAT CHAMFER |
ABMZ | DIAMETER | 0.870 INCHES MINIMUM AND 0.873 INCHES MAXIMUM |
ABNZ | EFFECTIVE LENGTH | 1.183 INCHES MINIMUM AND 1.193 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.683 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
ABPB | UNDER HEAD LENGTH | 1.281 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.063 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
CQFM | HARDNESS RATING | 56.0 ROCKWELL B MINIMUM OVERALL AND 76.0 ROCKWELL B MAXIMUM OVERALL |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | ZINC OVERALL |
CRRG | PIN HEAD DIAMETER | 1.063 INCHES NOMINAL |
HGTH | HEIGHT | 0.094 INCHES NOMINAL |
STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload