Part No. : 11430-3 | Alternate P/N : 114303 | Manufacturer : goodrich aerospace |
Item Name: pin grooved headless | NSN: 5315-00-057-4485 (5315000574485) | CAGE Code: 02121 |
FSC: 5315 Nails Machine Keys and Pins |
If you require part number 11430-3 from Goodrich Aerospace which is described as a Pin Grooved Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 11430-3 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315000574485 and was produced under the CAGE Code 02121. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 11430-3 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 11430-3
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-00-057-4485 Item Description: PIN,GROOVED,HEADLESS | 5315 | 000574485 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
11430-3 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
ABHP | OVERALL LENGTH | 0.970 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
ABMZ | DIAMETER | 0.480 INCHES MINIMUM AND 0.490 INCHES MAXIMUM |
ABNZ | EFFECTIVE LENGTH | 0.765 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.445 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
ABPE | UNDERCUT RADIUS | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
CRDY | FIRST END LOCATION | BOTH ENDS |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | OXIDE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload