Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX1024D6D16-6A | Alternate P/N : TX1024D6D166A | Manufacturer : h kramer and co |
| Item Name: screw close tolerance | NSN: 5305-01-514-3443 (5305015143443) | CAGE Code: 80593 |
If you require part number TX1024D6D16-6A from H Kramer And Co which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1024D6D16-6A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015143443 and was produced under the CAGE Code 80593. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1024D6D16-6A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-514-3443 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015143443 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HP1262D6D16-6 | 5 | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.374 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | REDEFINED HEAD GEOMETRY |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| ANEE | GRIP LENGTH | 1.000 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEARD, GEAR DRIVE RECESS-SPECIAL THREAD LENGTH, INCONEL 718 (125 KSI SHEAR) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE |
| AASL | HEAD DIAMETER | 0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AASB | FASTENER LENGTH | 1.375 INCHES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.260 INCHES NOMINAL FIRST HOLE |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AGAV | END ITEM IDENTIFICATION | F-18 AIRCRAFT |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.221 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions