GT20-2V15S1-A21A-30 by Haldex Hydraulics Corp With NSN 4320-01-373-3124

Part No. : GT20-2V15S1-A21A-30	Alternate P/N : GT202V15S1A21A30	Manufacturer : haldex hydraulics corp
Item Name: pump rotary	NSN: 4320-01-373-3124 (4320013733124)	CAGE Code: 70763
FSC: 4320 Power And Hand Pumps

If you require part number GT20-2V15S1-A21A-30 from Haldex Hydraulics Corp which is described as a Pump Rotary component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number GT20-2V15S1-A21A-30 which is listed under the Federal Supply Class 4320 Power And Hand Pumps. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4320013733124 and was produced under the CAGE Code 70763. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part GT20-2V15S1-A21A-30 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for GT20-2V15S1-A21A-30

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Characteristics Data of NSN 4320-01-373-3124, 4320013733124

MRC	Criteria	Characteristic
AJAB	DRIVE SHAFT TYPE	MACHINE KEYWAY
AHZA	PUMPING ELEMENT OPERATING POSITION	HORIZONTAL
AJAL	III PUMP BASIC MATERIAL	STEEL
ASAZ	DISCHARGE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR	0.8750-14 UNF
AAYU	INTAKE CONNECTION TYPE	THREADED INTERNAL
AJAC	DRIVE SHAFT END DIAMETER	1.000 INCHES NOMINAL
AAYT	INTAKE CONNECTION QUANTITY	1
AAYV	DISCHARGE CONNECTION QUANTITY	1
AHYW	DISCHARGE PRESSURE	100.0 POUNDS PER SQUARE INCH GAGE
ACKL	MEDIA FOR WHICH DESIGNED	HYDROCARBON FUELS AND OILS
AAYX	DRIVE CONNECTION TYPE	RIGID COUPLED
AAYW	DISCHARGE CONNECTION TYPE	THREADED INTERNAL
AHYV	MAXIMUM DISCHARGE FLOW RATE	15.0 GALLONS PER MINUTE
AHZR	ROTARY PUMP DESIGN	GEAR
AGAV	III END ITEM IDENTIFICATION	SUPPORT EQUIPMENT,B
AJAD	DRIVE SHAFT LENGTH	1.500 INCHES NOMINAL
AHZD	PUMP ROTATION DIRECTION	CLOCKWISE
AJAF	III UNPACKAGED UNIT LENGTH	10.100 INCHES NOMINAL
AAXX	MOUNTING TYPE	FLANGE
AHYZ	OPERATING SPEED AT RATED CAPACITY	1200.0 REVOLUTIONS PER MINUTE
AJAG	III UNPACKAGED UNIT WIDTH	6.880 INCHES NOMINAL
FEAT	SPECIAL FEATURES	THRU-DRIVE,COUPLING,9 TOOTH INTERNAL INVOLUTE SPLINE,0.5625 IN. PITCH DIA,16/32 DIMETRAL PITCH,30.0 DEG PRESSURE ANGLE,MAJOR DIA 0.625 IN. MIN. 0.636 IN. MAX.,MINOR DIA 0.5089 IN. MIN. 0.5139 IN. MAX.
ASWT	INTAKE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR	1.3125-12 UNF
AJAH	III UNPACKAGED UNIT HEIGHT	6.100 INCHES NOMINAL
AHZT	OPERATION METHOD	POWERED

Part GT20-2V15S1-A21A-30 With Different Manufacturers