Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : EL09-006-24 | Alternate P/N : EL0900624 | Manufacturer : harsco corporation |
| Item Name: housing bearing unit | NSN: 3130-00-045-6742 (3130000456742) | CAGE Code: 93568 |
If you require part number EL09-006-24 from Harsco Corporation which is described as a Housing Bearing Unit component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number EL09-006-24 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130000456742 and was produced under the CAGE Code 93568. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part EL09-006-24 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-045-6742 Item PartTypeName: HOUSING,BEARING UNIT | 3130 | 000456742 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| EL09-006-24 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVL | PILOT DIAMETER | 4.7450 INCHES MINIMUM AND 4.7550 INCHES MAXIMUM |
| ABKG | BOLT CIRCLE DIAMETER | 4.1250 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.3906 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.3700 INCHES MINIMUM AND 2.3800 INCHES MAXIMUM |
| AFWB | HOUSING DIAMETER | 5.0625 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 4.5315 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| ANJS | SHAFT END TYPE | OPEN |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| FEAT | SPECIAL FEATURES | FOUR MTG HOLES,TAPPED FOR 3/8-16 UNC THD 1.1875 IN. DEEP,HELICOIL INSERTS INSTALLED IN MTG HOLES,ALL MACHINED SURFACES TO BE 125 MICROINCH FINISH |
| MATT | MATERIAL | ALUMINUM ALLOY OVERALL |
| STYL | STYLE DESIGNATOR | FLANGE CARTRIDGE BLOCK |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions