Part No. : 09NE-048 | Alternate P/N : 09NE048 | Manufacturer : harvard industries inc |
Item Name: nut self locking hexagon | NSN: 5310-01-063-5072 (5310010635072) | CAGE Code: 72962 |
FSC: 5310 Nuts and Washers |
If you require part number 09NE-048 from Harvard Industries Inc which is described as a Nut Self Locking Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 09NE-048 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310010635072 and was produced under the CAGE Code 72962. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 09NE-048 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 09NE-048
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-01-063-5072 Item Description: Nut Self Locking Hexagon | 5310 | 010635072 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
09ne-048 | 5 | 1 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
CRTM | Bearing Surface Type | CHAMFERED OR |
AZKQ | Temp Rating | 250.0 DEG FAHRENHEIT MAXIMUM |
ASDB | Width Across Flats | 0.439 INCHES MAXIMUM |
MDCL | Material Document And Classification | QQ-N-281 CL B FED SPEC SINGLE MATERIAL RESPONSE NUT |
AAJF | Thread Direction | RIGHT-HAND |
TEST | Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
ASDB | Width Across Flats | 0.430 INCHES MINIMUM AND |
CSXL | Bearing Surface Finish | 125.0 MICROINCHES |
AAJD | Thread Class | 3B |
CRTL | Criticality Code Justification | MATT |
SR-5 | Design Control Reference Or Manufacturers Code | 2750 |
SPCL | Special Test Features | SPECIAL QUALITY CONTROL TESTING |
MATT | Material | NICKEL ALLOY R-405 NUT |
ADEA | Nut Height | 0.360 INCHES MAXIMUM |
CQJX | Nominal Thread Size | 0.250 INCHES |
SR-5 | Design Control Reference Or Manufacturers Code | JR889A |
CRSQ | Countersink Angle | 88.0 DEGREES NOMINAL NUT |
SR-5 | Design Control Reference Or Manufacturers Code | |
ACTA | Nut Style | HEXAGON |
MDCL | Material Document And Classification | MIL-M-20693 COMP A,TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING INSERT |
ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
MATT | Material | PLASTIC POLYAMIDE LOCKING INSERT |
CRTM | Bearing Surface Type | WASHER FACED |
ADEA | Nut Height | 0.240 INCHES MINIMUM AND |
MRC | Decoded Requirement | Clear Text Reply |
AAUM | Locking Feature | PREVAILING TORQUE WITH NONMETALLIC INSERT |
CMLP | Thread Quantity Per Inch | 28 |
BZRR | Thread Series | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload