Part No. : 2006405-59 | Alternate P/N : 200640559 | Manufacturer : hdi landing gear usa inc |
Item Name: pin hollow | NSN: 5315-01-073-2010 (5315010732010) | CAGE Code: 5ZBP4 |
FSC: 5315 Nails Machine Keys and Pins |
If you require part number 2006405-59 from Hdi Landing Gear Usa Inc which is described as a Pin Hollow component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2006405-59 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315010732010 and was produced under the CAGE Code 5ZBP4. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2006405-59 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2006405-59
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-01-073-2010 Item Description: Pin Hollow | 5315 | 010732010 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2006405-59 | 6 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | SQUARE W/THRU HOLE |
AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
ACHT | PIN OVERALL LENGTH | 2.750 INCHES NOMINAL |
ACHU | PIN OVERALL DIAMETER | 0.6231 INCHES MINIMUM AND 0.6238 INCHES MAXIMUM |
AGAV | III END ITEM IDENTIFICATION | LANDING GEAR SYSTEMS/COMPONENTS |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
FEAT | SPECIAL FEATURES | 2 PARALLEL TABS 0.220 IN. W,0.080 IN. LG BOTH ENDS |
MATT | MATERIAL | STEEL COMP 4340 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
SUPP | III SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURE(S) THAT MUST MAINTAIN A TIGHT FIT TOLERANCE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload