Part No. : 74A450995-2001 | Alternate P/N : 74A4509952001 | Manufacturer : hdi landing gear usa inc |
Item Name: pin grooved headed | NSN: 5315-01-112-8101 (5315011128101) | CAGE Code: 5ZSC8 |
FSC: 5315 Nails Machine Keys and Pins |
If you require part number 74A450995-2001 from Hdi Landing Gear Usa Inc which is described as a Pin Grooved Headed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 74A450995-2001 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315011128101 and was produced under the CAGE Code 5ZSC8. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 74A450995-2001 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 74A450995-2001
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-01-112-8101 Item Description: Pin Grooved Headed | 5315 | 011128101 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
74a450995-2001 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | SQUARE |
AASK | HEAD STYLE | ROUND W/WRENCH FLATS CHAMFERED |
ABMZ | DIAMETER | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
ABNZ | EFFECTIVE LENGTH | 1.177 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM |
ABPB | UNDER HEAD LENGTH | 1.780 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.090 INCHES NOMINAL |
ABRC | FIRST HOLE DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
ANEE | GRIP LENGTH | 1.271 INCHES MINIMUM AND 1.273 INCHES MAXIMUM |
ASDB | WIDTH ACROSS FLATS | 0.880 INCHES NOMINAL |
CRRG | PIN HEAD DIAMETER | 1.000 INCHES NOMINAL |
CSYM | SURFACE FINISH | 32.0 MICROINCHES SHANK END |
FEAT | SPECIAL FEATURES | 0.375 IN. DIA BY 1.125 IN. DP CONCENTRIC HOLE IN SHANK END ON AXIAL CENTERLINE |
HGTH | HEIGHT | 0.220 INCHES NOMINAL |
MATT | MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 T73 OR T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-200/11 T73 OR T73510 OR T73511 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload