Part No. : TX1024C4-16-6A | Alternate P/N : TX1024C4166A | Manufacturer : heartland precision fasteners inc |
Item Name: screw close tolerance | NSN: 5305-01-512-8305 (5305015128305) | CAGE Code: 0ZC92 |
FSC: 5305 Screws |
If you require part number TX1024C4-16-6A from Heartland Precision Fasteners Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1024C4-16-6A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015128305 and was produced under the CAGE Code 0ZC92. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1024C4-16-6A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TX1024C4-16-6A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-512-8305 Item Description: Screw Close Tolerance | 5305 | 015128305 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tx1024c4-16-6a | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
AASB | FASTENER LENGTH | 1.375 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM |
AAUJ | SPLINE MAJOR DIAMETER | 0.155 INCHES NOMINAL |
AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL |
ABQZ | INTERNAL DRIVE STYLE | TORX |
AGAV | END ITEM IDENTIFICATION | F18 E/F |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 1.000 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 28 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS-SPECIAL THREAD LENGTH, INCONEL 718 (125 KSI SHEAR) |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload