Part No. : TX1024C3-4-5A | Alternate P/N : TX1024C345A | Manufacturer : heartland precision fasteners inc |
Item Name: screw close tolerance | NSN: 5305-01-505-3998 (5305015053998) | CAGE Code: 0ZC92 |
If you require part number TX1024C3-4-5A from Heartland Precision Fasteners Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1024C3-4-5A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015053998 and was produced under the CAGE Code 0ZC92. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1024C3-4-5A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TX1024C3-4-5A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-505-3998 Item Description: Screw Close Tolerance | 5305 | 015053998 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tx1024c3-4-5a | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AASK | Head Style | FLAT COUNTERSUNK |
AHYM | Nominal Thread Diameter | 0.190 INCHES |
SFTT | Surface Treatment | PASSIVATE OVERALL |
AASA | Thread Length | 0.313 INCHES NOMINAL |
AGAV | End Item Identification | F18 E/F |
THSD | Thread Series Designator | UNJF |
AAUR | Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
AASL | Head Diameter | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
CXCY | Part Name Assigned By Controlling Agency | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR) |
AAJF | Thread Direction | RIGHT-HAND |
ABQZ | Internal Drive Style | TORX |
MATT | Material | NICKEL ALLOY 718 OVERALL |
CMLP | Thread Quantity Per Inch | 32 |
AAUH | Spline Minor Diameter | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
ANEE | Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
MDCL | Material Document And Classification | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
AASB | Fastener Length | 2.548 INCHES MINIMUM AND 2.578 INCHES MAXIMUM |
AAUJ | Spline Major Diameter | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
AAJD | Thread Class | 3A |
MRC | Decoded Requirement | Clear Text Reply |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload