Part No. : HR100-4-2 | Alternate P/N : HR10042 | Manufacturer : hi shear corporation |
Item Name: screw close tolerance | NSN: 5305-00-763-9420 (5305007639420) | CAGE Code: 73197 |
FSC: 5305 Screws |
If you require part number HR100-4-2 from Hi Shear Corporation which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HR100-4-2 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305007639420 and was produced under the CAGE Code 73197. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HR100-4-2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. HR100-4-2
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-763-9420 Item Description: Screw Close Tolerance | 5305 | 007639420 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Hr100-4-2 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.247 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.426 INCHES MINIMUM AND 0.456 INCHES MAXIMUM |
AASL | HEAD DIAMETER | 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
ANEE | GRIP LENGTH | 0.109 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 28 |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload