Part No. : HT618-4-15 | Alternate P/N : HT618415 | Manufacturer : hi shear corporation |
Item Name: screw close tolerance | NSN: 5305-01-520-3840 (5305015203840) | CAGE Code: 73197 |
FSC: 5305 Screws |
If you require part number HT618-4-15 from Hi Shear Corporation which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HT618-4-15 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015203840 and was produced under the CAGE Code 73197. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HT618-4-15 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. HT618-4-15
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-520-3840 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 015203840 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
HT618-4-15 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAUY | Point Length | 0.060 INCHES NOMINAL |
AHYM | Nominal Thread Diameter | 0.2500 INCHES |
AASK | Head Style | FLAT COUNTERSUNK |
MATT | Material | STEEL OVERALL |
SFTT | Surface Treatment | CADMIUM OVERALL |
MRC | Decoded Requirement | Clear Text Reply |
CSYM | Surface Finish | 32.0 MICROINCHES GRIP |
ABQJ | Point Style | FLAT |
AASL | Head Diameter | 0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
AASA | Thread Length | 0.469 INCHES NOMINAL |
AASB | Fastener Length | 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM |
ABQZ | Internal Drive Style | HIGH-TORQUE |
AAJF | Thread Direction | RIGHT-HAND |
STDC | Surface Treatment Document And Classification | NAS672 FED STD SINGLE TREATMENT RESPONSE OVERALL |
THSD | Thread Series Designator | UNJF |
AAUR | Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
MDCL | Material Document And Classification | NAS98 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
CQBC | Minimum Tensile Strength | 6400 POUNDS PER SQUARE INCH |
ANEE | Grip Length | 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 28 |
CSYM | Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
AAJD | Thread Class | 3A |
CSYM | Surface Finish | 32.0 MICROINCHES THREADS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload