Part No. : 8B414208-2 | Alternate P/N : 8B4142082 | Manufacturer : hiller aircraft corporation |
Item Name: shaft straight | NSN: 3040-00-614-3038 (3040006143038) | CAGE Code: 89446 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 8B414208-2 from Hiller Aircraft Corporation which is described as a Shaft Straight component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 8B414208-2 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040006143038 and was produced under the CAGE Code 89446. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 8B414208-2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 8B414208-2
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-614-3038 Item Description: SHAFT,STRAIGHT | 3040 | 006143038 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
8B414208-2 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | TWO CROSS DRILLED HOLES |
AAHN | END SIMILARITY | IDENTICAL |
ABHP | OVERALL LENGTH | 3.313 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | C-123 AIRCRAFT |
AMDL | FIRST END DIAMETER | 0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM |
AMDX | FIRST END HOLE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM |
AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.313 INCHES NOMINAL |
AMEB | FIRST END HOLE DEPTH | 0.499 INCHES NOMINAL |
AMFB | FIRST END DISTANCE BETWEEN HOLE CENTERS | 2.713 INCHES MINIMUM AND 7.723 INCHES MAXIMUM |
CSYM | SURFACE FINISH | 63.0 MICROINCHES |
CWFJ | FIRST END ANGLE BETWEEN HOLES | 49.0 DEGREES NOMINAL |
MATT | MATERIAL | STEEL COMP 4130 |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload