Part No. : 3620156-1 | Alternate P/N : 36201561 | Manufacturer : honeywell international inc |
Item Name: shaft shouldered | NSN: 3040-01-192-7388 (3040011927388) | CAGE Code: 99193 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 3620156-1 from Honeywell International Inc which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3620156-1 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040011927388 and was produced under the CAGE Code 99193. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3620156-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3620156-1
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-01-192-7388 Item Description: Shaft Shouldered | 3040 | 011927388 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3620156-1 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | PLAIN |
AAHN | END SIMILARITY | NOT IDENTICAL |
AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
ABHP | OVERALL LENGTH | 4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM |
AMDL | FIRST END DIAMETER | 1.8895 INCHES MINIMUM AND 1.8898 INCHES MAXIMUM |
AMFZ | SECOND END DIAMETER | 1.7100 INCHES MINIMUM AND 1.7200 INCHES MAXIMUM |
AMGA | SECOND END SPLINE LENGTH | 0.3000 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM |
AMGB | SECOND END SPLINE MINOR DIAMETER | 1.7225 INCHES MINIMUM AND 1.7300 INCHES MAXIMUM |
AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.7495 INCHES MINIMUM AND 1.7498 INCHES MAXIMUM |
AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
AMGF | SECOND END PITCH DIAMETER | 1.7323 INCHES NOMINAL |
ATPC | STEP QUANTITY | 9 |
BDSR | SECOND END SPLINE QUANTITY | 29 |
CSPY | LARGEST STEP DIAMETER | 1.8895 INCHES MINIMUM AND 1.8898 INCHES MAXIMUM |
FEAT | SPECIAL FEATURES | FIRST END HAS 3 SIDED FLANGE WITH 1 HOLE 0.2505 IN. MIN AND 0.2513 IN. MAX DIA IN EACH POINT |
MATT | MATERIAL | STEEL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload