Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : X35452 | Manufacturer : honeywell international inc | Item Name: gear worm |
| NSN: 3020-00-203-1671 (3020002031671) | CAGE Code: 70210 |
If you require part number X35452 from Honeywell International Inc which is described as a Gear Worm component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number X35452 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020002031671 and was produced under the CAGE Code 70210. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part X35452 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-203-1671 Item PartTypeName: GEAR,WORM | 3020 | 002031671 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| X35452 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSA | SPLINE QUANTITY | 14 BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.8121 INCHES NOMINAL |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 0.3500 INCHES NOMINAL BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.937 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 4.100 INCHES |
| CWPC | THREAD FORM QUANTITY | 2 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 8.7500 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.270 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.690 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.140 INCHES |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 0.350 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.630 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | SPLINE MINOR DIA 0.300 IN SPLINE MAJOR DIA 0.375 IN. |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions