Part No. : TK104P8S | Manufacturer : huck international inc | Item Name: screw close tolerance |
NSN: 5305-00-973-2281 (5305009732281) | CAGE Code: 97928 | FSC: 5305 Screws |
If you require part number TK104P8S from Huck International Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TK104P8S which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009732281 and was produced under the CAGE Code 97928. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TK104P8S today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TK104P8S
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-973-2281 Item Description: Screw Close Tolerance | 5305 | 009732281 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tk104p8s | C | 1 | C | 9 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.910 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
AAUM | LOCKING FEATURE | SLOTTED THREADS |
AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 28 |
CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload