HI85-6-8 by Huck International Inc With NSN 5305-01-278-5075

Part No. : HI85-6-8	Alternate P/N : HI8568	Manufacturer : huck international inc
Item Name: screw close tolerance	NSN: 5305-01-278-5075 (5305012785075)	CAGE Code: 97928
FSC: 5305 Screws

If you require part number HI85-6-8 from Huck International Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HI85-6-8 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012785075 and was produced under the CAGE Code 97928. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HI85-6-8 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for HI85-6-8

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number HI85-6-8 with NSN 5305-01-278-5075, 5305-01-278-5075

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-278-5075 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	012785075	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AIC985-6-8	5	2	3

Characteristics Data of NSN 5305-01-278-5075, 5305012785075

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.570 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
AASB	FASTENER LENGTH	1.080 INCHES MINIMUM AND 1.110 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.515 INCHES MINIMUM AND 0.566 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	OFFSET CRUCIFORM TORQUE SET)
AHYM	NOMINAL THREAD DIAMETER	0.375 INCHES
ANEE	GRIP LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP H11 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF