Part No. : 86060-605 | Alternate P/N : 86060605 | Manufacturer : hydraulics international inc |
Item Name: hose assembly nonmetallic | NSN: 4720-01-379-4918 (4720013794918) | CAGE Code: 56529 |
FSC: 4720 Hose and Tubing Flexible |
If you require part number 86060-605 from Hydraulics International Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 86060-605 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720013794918 and was produced under the CAGE Code 56529. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 86060-605 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 86060-605
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
4720-01-379-4918 Item Description: Hose Assembly Nonmetallic | 4720 | 013794918 | H | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
86060-605 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABKV | Outside Diameter | 0.590 INCHES NOMINAL |
AAJF | Thread Direction | RIGHT-HAND 1ST END |
CQCS | Layer Composition And Location | 3RD LAYER BRAIDED STEEL WIRE |
CRWL | Inside Surface Condition | SMOOTH |
ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
AAJD | Thread Class | 2B 1ST END |
CQGM | Maximum Operating Pressure | 5000.0 POUNDS PER SQUARE INCH |
THSD | Thread Series Designator | UNF 1ST END |
AKUU | End Connection Design | STRAIGHT 1ST END |
MRC | Decoded Requirement | Clear Text Reply |
AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
CRXX | Measuring Method And Length | 43.500 INCHES NOMINAL OVERALL |
ACKH | Minimum Inside Bending Radius | 4.000 INCHES |
AARX | Inside Diameter | 0.250 INCHES NOMINAL |
CQBD | Burst Test Pressure | 20000.0 POUNDS PER SQUARE INCH |
AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
CRJM | Outer Covering Environmental Protection | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
CQJX | Nominal Thread Size | 0.438 INCHES 1ST END |
AAGR | Cross-Sectional Shape Style | ROUND |
CQRB | Seat Angle | 37.0 DEGREES 1ST END |
MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON AND WATER AND AIR SINGLE RESPONSE |
AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
ZZZK | Specification/Standard Data | SAE J517, 100R2, TYPE AT-81343 NATIONAL STD/SPEC |
FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; U/O C130 F5/A7/F1 |
CQCS | Layer Composition And Location | 1ST LAYER BRAIDED STEEL WIRE |
CQCS | Layer Composition And Location | 2ND LAYER MOLDED RUBBER, SYNTHETIC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload