Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : B51-8089-01 | Alternate P/N : B51808901 | Manufacturer : illinois tool works inc |
| Item Name: gearshaft bevel | NSN: 3040-00-027-4944 (3040000274944) | CAGE Code: 5G804 |
| FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number B51-8089-01 from Illinois Tool Works Inc which is described as a Gearshaft Bevel component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number B51-8089-01 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040000274944 and was produced under the CAGE Code 5G804. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part B51-8089-01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-027-4944 Item PartTypeName: GEARSHAFT,BEVEL | 3040 | 000274944 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| B51-8089-01 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 4.000 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 4.000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 44 |
| AJWS | GEAR OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | PLAIN |
| AQGH | DIAMETRAL PITCH | 31 |
| AQPL | FACE WIDTH | 0.150 INCHES NOMINAL |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 30.0000 DEGREES |
| CWQD | PITCH ANGLE | 90.0000 DEGREES |
| CYEQ | SHAFT MATERIAL | STEEL COMP 440C OR STEEL COMP 440F |
| CYER | GEAR MATERIAL | COPPER ALLOY |
| CYET | SHAFT LARGEST DIAMETER | 0.399 INCHES MINIMUM AND 0.401 INCHES MAXIMUM |
| CYEU | GEAR LOCATION ON SHAFT | ON END OF SHAFT |
| CYEW | SHAFT END SIZE | 0.188 INCHES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions