Part No. : 3153407 | Manufacturer : illinois tool works inc | Item Name: screw tapping |
NSN: 5305-01-470-7020 (5305014707020) | CAGE Code: 83910 | FSC: 5305 Screws |
If you require part number 3153407 from Illinois Tool Works Inc which is described as a Screw Tapping component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3153407 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014707020 and was produced under the CAGE Code 83910. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3153407 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3153407
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-470-7020 Item Description: Screw Tapping | 5305 | 014707020 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3153407 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AASB | FASTENER LENGTH | 1.2032 INCHES MINIMUM AND 1.2968 INCHES MAXIMUM |
AASK | HEAD STYLE | CHAMFER FLANGE |
AASU | HEAD HEIGHT | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
AATC | EXTENDED WASHER DIAMETER | 0.398 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
AGAV | END ITEM IDENTIFICATION | RADAR |
CRGF | NONMACHINE THREAD STYLE | CONE POINT (TYPE BP) |
CTYF | NONMACHINE NOMINAL THREAD DIAMETER | 0.260 INCHES |
FEAT | SPECIAL FEATURES | ITEM IS A SELF-TAPPING, REMOVABLE, CONCRETE ANCHOR WITH A SPECIALLY DESIGNED TWO LEAD THREAD, TWO THREADS OF UNEQUAL SIZE, LARGER DIAMETER THREAD IS NOTCHED AT INTERVALS ALONG ITS LENGTH TO FACILITATE TAPPING INTO MASONRY MATERIALS; A SPECI |
MATT | MATERIAL | STEEL COMP 1022 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload