Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 8-52-89 | Alternate P/N : 85289 | Manufacturer : itw heartland components inc |
| Item Name: housingbearingunit | NSN: 3130-01-226-3721 (3130012263721) | CAGE Code: 9U023 |
| FSC: 3130 Bearings Mounted |
If you require part number 8-52-89 from Itw Heartland Components Inc which is described as a Housingbearingunit component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 8-52-89 which is listed under the Federal Supply Class 3130 Bearings Mounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130012263721 and was produced under the CAGE Code 9U023. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 8-52-89 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-226-3721 Item PartTypeName: HOUSING,BEARING UNIT | 3130 | 012263721 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8-52-89 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.625 INCHES MINIMUM AND 0.626 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 5.0000 INCHES MINIMUM AND 5.0010 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.000 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 11.300 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 13.938 INCHES MINIMUM AND 14.062 INCHES MAXIMUM |
| AGKL | LUBRICATION FITTING TYPE | FLUSH |
| ANJS | SHAFT END TYPE | OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 5.650 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| FEAT | SPECIAL FEATURES | COUNTERBORED APERTURE 2 ADDITIONAL MOUNTING HOLES IN BASE 4 EQUALLY SPACED 0.531 DIA MOUNTING HOLES ON A 6.000 DIA BOLT CIRCLE |
| MATT | MATERIAL | STEEL COMP 304 OR STEEL COMP 1009 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-698 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions