Part No. : H63-101315-53 | Alternate P/N : H6310131553 | Manufacturer : itw shakeproof automotive products |
Item Name: screw assembled washer | NSN: 5305-00-807-9190 (5305008079190) | CAGE Code: 78189 |
FSC: 5305 Screws |
If you require part number H63-101315-53 from Itw Shakeproof Automotive Products which is described as a Screw Assembled Washer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number H63-101315-53 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305008079190 and was produced under the CAGE Code 78189. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part H63-101315-53 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. H63-101315-53
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-807-9190 Item Description: Screw Assembled Washer | 5305 | 008079190 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
H63-101315-53 | 2 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASB | FASTENER LENGTH | 0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
AAVW | WASHER QUANTITY | 1 |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
CMLP | THREAD QUANTITY PER INCH | 32 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CSPG | PRIMARY WASHER OUTSIDE DIAMETER | 0.645 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
CTHW | PRIMARY WASHER STYLE | DOME INTERNAL TEETH |
CTJJ | PRIMARY WASHER MATERIAL THICKNESS | 0.017 INCHES NOMINAL |
CWBW | SECONDARY WASHER MATERIAL THICKNESS | 0.017 INCHES NOMINAL |
MATT | MATERIAL | STEEL COMP 1022 OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
AASA | THREAD LENGTH | 0.656 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload