Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 55-3-8-203 | Alternate P/N : 5538203 | Manufacturer : iv electronic klaus vespermann kg |
| Item Name: resistor variable wire wound non | NSN: 5905-00-890-4349 (5905008904349) | CAGE Code: C7407 |
| FSC: 5905 Resistors |
If you require part number 55-3-8-203 from Iv Electronic Klaus Vespermann Kg which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 55-3-8-203 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905008904349 and was produced under the CAGE Code C7407. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 55-3-8-203 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-890-4349 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008904349 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5351-072 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| AAPN | SECTION QUANTITY | 1 |
| ABHP | OVERALL LENGTH | 0.728 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.190 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.083 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.030 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.527 INCHES MINIMUM AND 0.533 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.562 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 29616-025-002824 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions