Part No. : LD111-0044-2412 | Alternate P/N : LD11100442412 | Manufacturer : j w manufacturing inc |
Item Name: screw close tolerance | NSN: 5305-01-215-5793 (5305012155793) | CAGE Code: 23899 |
FSC: 5305 Screws |
If you require part number LD111-0044-2412 from J W Manufacturing Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number LD111-0044-2412 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012155793 and was produced under the CAGE Code 23899. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part LD111-0044-2412 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. LD111-0044-2412
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-215-5793 Item Description: Screw Close Tolerance | 5305 | 012155793 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ld111-0044-2412 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.382 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 1.132 INCHES MINIMUM AND 1.162 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 0.750 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 28 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
FEAT | SPECIAL FEATURES | INTERNAL DRIVE RIBBED |
MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload