Part No. : STD30-1-1-4 | Alternate P/N : STD30114 | Manufacturer : jacobson mfg co inc |
Item Name: screw machine | NSN: 5305-00-900-9009 (5305009009009) | CAGE Code: 73484 |
FSC: 5305 Screws |
If you require part number STD30-1-1-4 from Jacobson Mfg Co Inc which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number STD30-1-1-4 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009009009 and was produced under the CAGE Code 73484. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part STD30-1-1-4 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. STD30-1-1-4
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-900-9009 Item Description: Screw Machine | 5305 | 009009009 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Std30-1-1-4 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.250 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.250 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
CMLP | THREAD QUANTITY PER INCH | 40 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
FEAT | SPECIAL FEATURES | FURNISHED W/1 EACH 3 RING |
THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload